Technology increases component quality by reducing spatter and heat input
In series production, increasing component quality has a direct impact on overall equipment effectiveness and is of great importance in terms of increasing efficiency in production. Green lasers are the basis for high-quality welding with avoidance of spatter. This enables welding of the most sensitive electronic components. By reducing spatter by over 95%, short circuits and resulting defective components are effectively avoided. The component design can also be kept more compact, as welds can be placed closer to the sensitive components. The low heat input in the copper also results in minimal distortion of the components, and deformation of surrounding plastic components is avoided. This increases component quality.GREEN beyond color: Integration of green laser welding processes into series production enables energy-saving production
The use of green laser technology in series production also has an immensely positive impact on the energy balance of production. Compared to conventional processes using infrared lasers, green laser welding is highly energy-saving. By using the new technology, energy savings of up to 30% can be achieved compared to conventional applications. This makes the production of e-mobility components more energy efficient - and thus GREEN even beyond the color of the laser!
View the embedded image gallery online at:
https://ake-technologies.com/news/178-breakthrough-first-use-of-green-laser-welding-processes-in-series-production#sigProId54b1001c7e
https://ake-technologies.com/news/178-breakthrough-first-use-of-green-laser-welding-processes-in-series-production#sigProId54b1001c7e